Worldwide Distribution of Aircraft Parts & Supplies
HOME
 
           
  Secure Online Ordering
 
PRODUCTS
 
Alternators
    Parts
AVBlend
Batteries
    Accessories
    Appl.Data
    Cross-Ref.
    Spec.Sheet
    STC Listing
Brakes
   Conversion Kits
   Discs/Linings
   Corp&Commuter
Carburetors
    Kits
Filters
    Vacuum
Fuel Cells
Fuel Pumps
    Airborne
    Dukes
    Romec/Crane
Fuel Systems
Gaskets
Heaters
IgnitionHarness
Lighting
    Interior
    Lamps&Bulbs
    Landing
    (LED) Lighting
LED Kits
    Nav/Pos Lights
  Strobe Lights
PowerSupplies
      Kits
Beech
          Cessna
Mooney
          Piper
          Homebuilts
Magnetos
     Bendix
         Parts
     Slick  
Mufflers
Oil Filters
    Appl.Data
    Champion
     Kelly Filters
Propeller DeIce
Regulators
Spark Plugs
    Appl.Data
    Champion
    Unison
Starters
 
    ESI New Starters
    Parts
    Sky-Tec
Tires
    McCreary
Turbochargers
     (Rayjay)
Vacuum Pumps
Standby/Systems
Voltage Regulators
Windshields/Windows

Privacy Policy

Terms of Sale


AVIATION STROBE POWER SUPPLIES

See our Strobe Kits >  Cessna  Beech  Piper  Mooney  Homebuilts
Model HDACF series provides simultaneous flashing, alternate flashing or both. It will
operate one, two or three strobe lightheads. Operating the wing tip strobes in the alternating
mode will provide an accumulated 42 joules of power to each light. When in the
simultaneous mode, the accumulated power to each light is 21 joules.
In the three light mode, the wing tips will flash simultaneous at an accumulated 21 joules
each, they alternate with a third light operating at an accumulated 42 joules. On the trigger
selector outlet, a switch mounted in place of the jumper will allow wing tip outlets 2
& 3 to be turned off, while the tail outlet 1 will remain on. This function is commonly used
when the third light is for ground operations. This power supply will operate from 10 to
30 VDC.
 
BUY!  $379.00
Model HDHCF series provides simultaneous flashing, alternate flashing or both (See
HDACF for functions). It directly replaces factory installed units on Hughes 500 Series
Helicopters. Unit can directly replace 60-1431 -1 & -3 power supplies without wiring or
baseplate modifications. This power supply will operate from 10 to 30 VDC.

 

BUY!  $550.00
 
Model HDS produces 20 joules of energy alternating between two light assemblies. This unit produces a single flash and has a low current draw. This power supply will operate from 10 to 30 VDC.

BUY!  $472.00

MODEL A490TCF SERIES
Model HTCF series operates one strobe lighthead. It is our most compact unit and can be
mounted in the wing tip and/or the tail adjacent to the light head. It produces an accumulated
19 joules of power. It will only meet 400 CP when used with the A470A-W. This
unit cannot be synchronized. This power supply operates from 10 to 30 VDC (Not
Approved for use with red strobe light).
            Model #         Description                                                    Approvals
 A490TCF        Standard unit, 20” leads, amp connectors   FAA/PMA
BUY!  $210.00
MODEL A490TCCF SERIES
Model HTCCF series is the same as the A490ATSCF but has a mounting plate with additional
holes that directly replaces factory installed systems on single engine Cessna’s,
Aero Commanders, and Grumman Americans.

 

BUY!  $210.00
MODEL A490ATSCF SERIES
Model HTSCF series operates one strobe lighthead. Its compact size allows mounting in
the wing tip and/or the tail, adjacent to the lighthead. It produces an accumulated 34
joules of power and can be equipped to flash simultaneously with up to 5 other like units
by connecting an 18 gauge wire between outlet 3 on the input power connector. This
power supply will operate from 10 to 30 VDC.
 
BUY!  $286.13
Model - 6542600 Designed to determine whether power supply is operating normally. Kit contains trouble-shooting procedures. Also contains adapter for testing certain Grimes and Hoskins strobe systems.
 
 
BUY!  $97.00
 

 

HOME