Worldwide Distribution of Aircraft Parts & Supplies
HOME
 
           
  Secure Online Ordering
 
PRODUCTS
 
Alternators
    Parts
AVBlend
Batteries
    Accessories
    Appl.Data
    Cross-Ref.
    Spec.Sheet
    STC Listing
Brakes
   Conversion Kits
   Discs/Linings
   Corp&Commuter
Carburetors
    Kits
Filters
    Vacuum
Fuel Cells
Fuel Pumps
    Airborne
    Dukes
    Romec/Crane
Fuel Systems
Gaskets
Heaters
IgnitionHarness
Lighting
    Interior
    Lamps&Bulbs
    Landing
    (LED) Lighting
LED Kits
    Nav/Pos Lights
  Strobe Lights
PowerSupplies
      Kits
Beech
          Cessna
Mooney
          Piper
          Homebuilts
Magnetos
     Bendix
         Parts
     Slick  
Mufflers
Oil Filters
    Appl.Data
    Champion
     Kelly Filters
Propeller DeIce
Regulators
Spark Plugs
    Appl.Data
    Champion
    Unison
Starters
 
    ESI New Starters
    Parts
    Sky-Tec
Tires
    McCreary
Turbochargers
     (Rayjay)
Vacuum Pumps
Standby/Systems
Voltage Regulators
Windshields/Windows

Privacy Policy

Terms of Sale

WHELEN STROBE KITS
    BUILD YOUR OWN
                    
To Purchase any, or multiple items, click on the box in the Buy field,
go-to bottom of page and click on (Place in my Shopping Cart)
Buy
Power Supplies
Price
Model HDACF provides simultaneous flashing, alternate flashing or both. It will operate one, two or three strobe lightheads. Operating the wing tip strobes in the alternating mode will provide an accumulated 42 joules of power to each light. When in the simultaneous mode, the accumulated power to each light is 21 joules. In the three light mode, the wing tips will flash simultaneous at an accumulated 21 joules each, they alternate with a third light operating at an accumulated 42 joules. On the trigger selector outlet, a switch mounted in place of the jumper will allow wing tip outlets 2 & 3 to be turned off, while the tail outlet 1 will remain on. This function is commonly used when the third light is for ground operations. This power supply will operate from 10 to 30 VDC.
$379.00
Model HDHCF provides simultaneous flashing, alternate flashing or both (See HDACF for functions). It directly replaces factory installed units on Hughes 500 Series Helicopters. Unit can directly replace 60-1431 -1 & -3 power supplies without wiring or baseplate modifications. This power supply will operate from 10 to 30 VDC.
$550.00
Model HDS produces 20 joules of energy alternating between two light assemblies. This unit produces a single flash and has a low current draw. This power supply will operate from 10 to 30 VDC.
$472.00
MODEL A490TCF Model HTCF series operates one strobe lighthead. It is our most compact unit and can be mounted in the wing tip and/or the tail adjacent to the light head. It produces an accumulated 19 joules of power. It will only meet 400 CP when used with the A470A-W. This unit cannot be synchronized. This power supply operates from 10 to 30 VDC (Not Approved for use with red strobe light).
$210.00
MODEL A490TCCF Model HTCCF series is the same as the A490ATSCF but has a mounting plate with additional holes that directly replaces factory installed systems on single engine Cessna’s, Aero Commanders, and Grumman Americans.
$210.00
MODEL A490ATSCF Model HTSCF series operates one strobe lighthead. Its compact size allows mounting in the wing tip and/or the tail, adjacent to the lighthead. It produces an accumulated 34 joules of power and can be equipped to flash simultaneously with up to 5 other like units by connecting an 18 gauge wire between outlet 3 on the input power connector. This power supply will operate from 10 to 30 VDC.
$270.00
Wing Tip Strobe/Light Assembly
MODEL A600 PG14 GREEN Wing tip anti-collision, forward position and tail position lights, all in one compact unit.Tail position light eliminates the need for a tail mounted position light. Available in 14 or28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and thetaillight lamp is 25 watts.
$189.00
MODEL A600 PR14 RED Wing tip anti-collision, forward position and tail position lights, all in one compact unit.Tail position light eliminates the need for a tail mounted position light. Available in 14 or28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and thetaillight lamp is 25 watts.
$189.00
MODEL A600 PG28 GREEN Wing tip anti-collision, forward position and tail position lights, all in one compact unit.Tail position light eliminates the need for a tail mounted position light. Available in 14 or28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and thetaillight lamp is 25 watts.
$189.00
MODEL A600 PR28 RED Wing tip anti-collision, forward position and tail position lights, all in one compact unit.Tail position light eliminates the need for a tail mounted position light. Available in 14 or28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and thetaillight lamp is 25 watts.
$189.00
Wing Tip Strobe/Light Assembly
MODEL A650 PG14 GREEN Wing tip with anti-collision & forward position lights. Can be used to convert non-Whelen position lights into a position/anti-collision light system. The small size allows for mounting into a wing tip enclosure. Available in 14 or 28 VDC and in a radio-shielded version. The forward position lamp is 26 watts.
$165.00
MODEL A650 PR14V RED Wing tip with anti-collision & forward position lights. Can be used to convert non-Whelen position lights into a position/anti-collision light system. The small size allows for mounting into a wing tip enclosure. Available in 14 or 28 VDC and in a radio-shielded version. The forward position lamp is 26 watts.
$165.00
MODEL A650 PG28V GREEN Wing tip with anti-collision & forward position lights. Can be used to convert non-Whelen position lights into a position/anti-collision light system. The small size allows for mounting into a wing tip enclosure. Available in 14 or 28 VDC and in a radio-shielded version. The forward position lamp is 26 watts.
$165.00
MODEL A650 PR28V RED Wing tip with anti-collision & forward position lights. Can be used to convert non-Whelen position lights into a position/anti-collision light system. The small size allows for mounting into a wing tip enclosure. Available in 14 or 28 VDC and in a radio-shielded version. The forward position lamp is 26 watts.
$165.00
INSTALLATION CABLE KITS
All cable kits include all required connectors for hooking up the strobe light to the power supply only, warning placards and the Installation Service Manual. All cable is 16 gauge 3/c shielded. The cable diameter is .275”. The weight is .050 lbs. per linear foot.
Kits do not include switches or breakers.
HS5 5’ Cable kit $27.60
HT10 10’ Cable kit $28.80
HS30 30’ Cable kit $45.60
HD60 60’ Cable kit $72.00
HDT390 90’ Cable kit $100.00
HT Install kit only, no cable or connectors $16.20

 

 
 
Aviation Full Line Catalog
Complete Listing of All Products

 

Literature
Download Printable Aviation Literature

 

System Recommendations
Click on Your Make of Aircraft for Recommended Lighting Systems
 
New Updated STC Installation & Service Manual (Requires Adobe Acrobat Reader)
This document includes installation instructions and photographs, along with STC information
and aircraft eligibility listings
.
Price List & Spare Parts Reference Guide (Requires Adobe Acrobat Reader)
 
PMA Supplements (Requires Adobe Acrobat Reader)

 

 

HOME