AeroParts & Supply, Inc. - Whelen Aircraft Strobe Lights

BUY! A600PG14 Position green, 14 VDC FAA/TSO-C30b, FAA/PMA

BUY! A600PG28 Position green, 28 VDC FAA/TSO-C30b, FAA/PMA

BUY! A600PR14 Position red, 14 VDC FAA/TSO-C30b, FAA/PMA

BUY! A600PR28 Position red, 28 VDC FAA/TSO-C30b, FAA/PMA

BUY! A500AV14 Vertical mount, 14 VDC FAA/PMA,FAA/TSO-C30b

BUY! A500AV28 Vertical mount, 28 VDC FAA/PMA,FAA/TSO-C30b

BUY! A500AH14 Horizontal mount, 14 VDC FAA/PMA,FAA/TSO-C30b

BUY! A500AH28 Horizontal mount, 28 VDC FAA/PMA,FAA/TSO-C30b

Worldwide Distribution of Aircraft Parts & Supplies

See our Strobe Kits > Cessna Beech Piper Mooney Homebuilts

MODEL HRCFA SERIES

Model HRCFA series is a self-contained CometFlash strobe anti-collision light. The unique

polycarbonate optic lens and reflector design re-directs stray light rays into the horizontal

plane to provide maximum 360º of uniform light coverage. Available in three different

lens colors, Aviation Red, Aviation White and Split Aviation Red/White and in radio-shielded

configurations. FAA approved as a direct replacement for any rotating beacon that uses

a 3-3/4” dia. mounting hole. Can be installed in the vertical fin or the fuselage. Fuselage

installation requires the A440 mounting adapter. Operates between 10 to 30 VDC.

Specifications:

■ Weight: 1.5 lbs. ■ Height: 7.25” ■ Diameter: 3.7”

■ Power Consumption: 3.2 amps @ 14 VDC, 1.6 amps @ 28 VDC

          Model #          Description                                               Approvals

BUY! HRCFAR          Standard assembly, red lens                   FAA/PMA

BUY! HRCFAW         Standard assembly, white lens                FAA/PMA

BUY! HRCFAS          Standard assembly, split red/white lens FAA/PMA

$ 345.00


Call for Quote



$ 16.20

$ 39.00

STROBE LIGHTS - WING TIP

MODEL A600 PG/PR SERIES
Wing tip anti-collision, forward position and tail position lights, all in one compact unit.Tail position light eliminates the need for a tail mounted position light. Available in 14 or28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and thetaillight lamp is 25 watts.

■ Position Lamps Power Consumption: 4 Amps @ 14 VDC; 2 Amps @ 28 VDC

■ Weight: 0.8 lbs. ■ Exposed Height: 2.4” ■ Length: 5.63” ■ Width: 1.7”

Model # Description Approvals

Model A625 has many different applications. It can be used for aircraft with tip-tanks with

enclosed position lights (under a fairing), or as an add-on strobe on the wing or the tail.

Available in a radio-shielded version.

■ Weight: 0.2 lbs. ■ Exposed Height: 1.7”

Model # Description Approvals

BUY! 625 Standard unit, clear lens FAA/PMA

Converts existing Whelen W1285 position lights into a position/anti-collision light system

by removing the existing retainer and replacing it with the A650 assembly. Available in a

radio-shielded version.

■ Weight: 0.2 lbs. ■ Exposed Height: 2.4”

Model # Description Approvals

BUY! A650 Standard unit FAA/PMA

MODEL A650 PG/PR SERIES

Wing tip with anti-collision & forward position lights. Can be used to convert non-Whelen

position lights into a position/anti-collision light system. The small size allows for mounting

into a wing tip enclosure. Available in 14 or 28 VDC and in a radio-shielded version.

The forward position lamp is 26 watts.

■ Position Lamp Power Consumption: 2 Amps @ 14 VDC; 1 Amp @ 28 VDC

■ Weight: 0.6 lbs. ■ Exposed Height: 2.4” ■ Length: 4.0” ■ Width: 1.7”

Model # Description Approvals

BUY! A650PG14 Position green, 14 VDC FAA/PMA

BUY! A650PG28 Position green, 28 VDC FAA/PMA

BUY! A650PR14 Position red, 14 VDC FAA/PMA

BUY! A650PR28 Position red, 28 VDC FAA/PMA

Model A610 flash tube and Model A612 glass lens are used for installing wing tip strobes

in single engine Cessna’s 1972 and later. The existing position light retainer is modified

to accommodate the lens, and the flash tube is mounted directly behind. The unique magnifying

design of the A612 lens increases the light intensity by two to three times in the

horizontal plane. These items may be used for custom installations or as spare parts for

existing light assemblies. The A612 lens is available in Aviation Red and an RFI coated

version. Lenses meet material requirements of MIL-C-7989B Class B.

■ A610 Flash Tube Weight: 0.09 lbs.

■ A612 Lens Weight: 0.08 lbs.

Model # Description Approvals

BUY! A610 Standard unit, 6” leads FAA/PMA

A remote strobe light assembly compatible with all Whelen power supplies. It can be

installed on the fuselage or the vertical fin. The Pyrex Glass lens (clear only) makes the

assembly suitable for use in severe vibration, chemical and moisture conditions (i.e. agricultural

aircraft). Requires either the model H102 or model H103 mounting adapter.

■ Weight: 0.3 lbs. ■ Exposed Height: 2.25” ■ Diameter: 2.5”

Model # Description Approvals

BUY! A450 Standard assembly, clear lens FAA/PMA

A remote strobe light assembly, compatible with all Whelen power supplies. It can be

installed on the fuselage or the vertical fin. The unique polycarbonate optic lens and

reflector design, re-directs stray light rays into the horizontal plane to provide the maximum

360º of uniform light coverage possible. Available in three different lens colors,

Aviation Red, Aviation White and Split Aviation Red/White. Available in radio-shielded

configurations. All assemblies require either the model H102 or H103 mounting adapter.

■ Weight: 0.3 lbs. ■ Exposed Height: 3.75” ■ Diameter: 2.5”

Model # Description Approvals

BUY! A470AR Standard assembly, red lens FAA/PMA

BUY! A470AW Standard assembly, white lens FAA/PMA

BUY! A470AS Standard assembly, split red/white lens FAA/PMA

Combination strobe/tail navigation light used when the wing tip anti-collision lights are

mounted in an enclosure and can’t provide 360º of strobe coverage. It is a direct replacement

for the standard tail position light. Available in a radio-shielded version. Voltage (14

or 28) and mounting (horizontal or vertical) must be specified when ordering.

■ Weight: 0.3 lbs. ■ Exposed Height: 1.7” ■ Diameter: 1.5”

Model # Description Approvals

Designed for the model A470A or model A450 series remote strobe lighthead assemblies.

The model H102 allows flush mounting of the lighthead to the skin of the fuselage or the

vertical stabilizer on later model Cessna Single engines. The H103 is designed for strobe

assemblies to be installed in the standard 3-3/4” dia. rotating beacon mounting hole.

Model # Description Approvals

BUY! H102 Flush mount adapter FAA/PMA

$12.00

BUY! H103 Rotating beacon mount adapter